Mini Bucket Dividers

by CURS3D · Organizers

135 Downloads

109 Likes

76 Makes

First in the mini bucket accessories, the dividers. There are non-divided top/bottom included also. Simple 1 hr print, no supports, small gripping area along middle post to help pull the dividers out of the buckets.

curs3d lowesminibucket lowes mini bucket mini bucket organizer bucket organizer small storage storage

CURS3D also publishes on

21 additional models across 1 more platforms

Printables

21 models

♥ 286 ↓ 1,300 ⚒ 10

Frequently Asked Questions

Does Mini Bucket Dividers need supports when printing?

No supports needed for Mini Bucket Dividers — it's designed to print clean off the bed.

How long does it take to print Mini Bucket Dividers?

According to the design notes, Mini Bucket Dividers takes approximately 1 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Mini Bucket Dividers available in?

Mini Bucket Dividers is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is Mini Bucket Dividers free to download?

Yes, Mini Bucket Dividers is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Mini Bucket Dividers

Similar Models

Add to Collection