Mini Case- AI Gen

Prompt given to GPT:This case is for small demonstrations Exterior (L×W×D) 6.86 in x 5.68 in x 3.53 in Interior (L×W×D) 6.026 in x5.026 in x 3.072 in Lid Depth .572 in Bottom Depth 2.428 in Total Depth 3" Empty Interior Regular Hinges Black Filament Matte Rugged small carabiner loop Label Area for logosAI gen directions:3D Printing Directions for: Mini Demo Case (Pelican-Style)⚙️ Recommended Printer Type:FDM (best for functional rugged cases)Optional: Resin if you're going for detail over strength, but post-processing will be more involved.📐 Orientation & Parts:This case should be printed in two parts:LidBasePrint them separately lying flat with the opening side facing up for best layer adhesion on hinges and clips.🧱 Slicer Settings:Setting ValueLayer Height 0.2mm (standard), or 0.16mm for finer detailWall Line Count 4 (for extra durability)Top/Bottom Layers 5Infill 30–40% Gyroid or GridMaterial PLA+, PETG, or ABS (for heat resistance)Supports Yes (for hinges and clip area) – use Tree Supports if availableAdhesion Brim or Skirt (Brim preferred for larger bases)Print Speed 50mm/s (reduce for better hinge detail)Cooling Enabled (but reduce for ABS)Z-Hop 0.2mm🔗 Assembly Notes:Hinges: Pin-based, designed to be printed separately or printed in place and then snapped together (depending on STL).Clips: Test tolerance first. You might slightly sand clip edges for smooth locking action.Carabiner Loop: Reinforced – don’t scale this part down or it may snap under stress.💡 Pro Tips:Use black matte PLA+ to mimic the exact aesthetic of commercial Pelican cases.Add a silicone O-ring or gasket in the inner groove if waterproofing is needed.Customize the logo label plate using resin or vinyl stickers post-print.If you want foam inserts, use pick-n-pluck foam or 3D print a grid-style insert.