Thingiverse
Mini desktop case (raspberry Pi4)
di Endert0m
67
Download
37
Likes
0
Makes
This is a mini desktop like raspberry pi4 case.
You will need x8 (M4x8mm) screws and x4 (M4x15mm) screws, then a 50x50x10mm fan (i used an old one from cooler master), two LEDs (one green and one red), and a 100Ω resistor. You will also need x4 tiny screws to hold the raspberry into the case.
To spread the light well, you should use some white translucent plastic and a bit of paper in front of the LEDs.
You will need x8 (M4x8mm) screws and x4 (M4x15mm) screws, then a 50x50x10mm fan (i used an old one from cooler master), two LEDs (one green and one red), and a 100Ω resistor. You will also need x4 tiny screws to hold the raspberry into the case.
To spread the light well, you should use some white translucent plastic and a bit of paper in front of the LEDs.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
