Mini Desktop Locker Storage

Mini Desktop Locker Storage (With Shelf)Perfect for storing small office/school supplies as well as some mini 3D models**Locker is functional. Door opens/closes and combination knob turns**Slicing Software: Ultimaker CuraPrinted using PLA/PLA+Infill 40%Retraction 0.5 (direct drive) Pleaseuse what's best for your extruder!Nozzle Temp 200-220c**Supports Are Needed** (but very little)Follow recommend support in your slicerMine is set to Normal and Everywhere**Please Note**I recommend using≤0.5 nozzle for the door≤0.3 nozzle for the knob≤0.1 nozzle for the lockerI also recommend painting (if you choose to) BEFORE assembling as it makes it much easier to paintHow To Assemble:1.) Insert the knob through the front of the door hole and attach the back by inserting into the knob2.) Align the posts on the door to the holes on the right side of the locker and insert**Some parts may require light sanding after painting depending on the thickness of the paint**