Mini Disc Golf

This is a 1:12 miniature of a Disc Golf basket and discs.All parts 3D printed. Requires assembly of small parts, and glue is recommended. This print should be handled gently but will withstand mini discs being thrown at it!AssemblyRecommended tools:Hobby knifeTweezersGlue (I used gel CA glue)Toothpick or other thin object to apply glueUsing glue is recommended to make assembly easier and keep everything together.I use a very small amount, so that it could be pulled apart if needed. 1. Attach basket to stemThe basket slides onto the top of the stem until it hits the ledge about halfway down.Use the knife to remove any excess material from the bottom of the internal hole on the basket.This should be enough to allow the basket to slide onto the stem with little force.If the basket still will not fit, a small drill bit can be used to make the hole slightly bigger. Apply a small amount of glue to the underside of the basket to keep it in place. 2. Attach chain bracket to stemThe chain brack