mini hinge v1

mini hinge v1

I designed it for a plexiglass box. I also designed a micro version.

It rotates 180 degrees in the closing direction and 90 degrees in the opening direction. I added a block that stops the closing angle at 180 degrees and I limited the opening angle to 90 degrees.
total movement angle 270 degrees. v1a rotates 180 degrees-139 degrees, totaly 319 degrees.
dimensions
v1 35x20x10mm
v1a 50x20x10mm
v1b 50x20x10mm more thicknes
v1c 50x30x11mm

I recommend you print with 100% fill. I did not use support.

you need
m3x15mm bolt
m3 nut

I used the v1a version in the video. v1a was a bit underpowered, but later I designed v1b, it was supposed to be more powerful.
https://youtu.be/ev5iPRGsJ3c?si=UeCbDwR3ahKeFQmA

if you want to support
https://www.crealitycloud.com/model-detail/m3-mini-hinge-v1?source=22