Mini Lava Lamp – 3D printable model from MakerWorld

MakerWorld

Decor

Mini Lava Lamp

by LeopardGeckoGuy · Decor

60 Downloads

39 Likes

42 Makes

Go to Model

Thought I would make my lava lamp a little brother. This model prints in 1 part. No supports are needed, but AMS is. If requested, I can make a non-AMS version. This model takes about 1 hour and 17 grams to print. It's about 90mm tall, which I would consider mini, but you could scale it to your liking. As always, let me know if you have any questions, concerns, comments, etc. Enjoy! Leopardgeckoguy Boost MeLike this model? Want to support me? A boost goes a super long way and helps me continue to make models like this.

lava lamp lava lamp mini lava lamp mini lamp cute tiny tiny lava lamp leopardgeckoguy

Category

Decor

Source

MakerWorld

Published

27.09.2025

Updated

30.04.2026

What you need to print this: Intermediate

Why?

no supports · 2 colors · large print

Support-free Single piece 2 colors / AMS

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 2/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

200 mm (Large)

Colors

2 (AMS/MMU recommended)

Est. print time

1 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Mini Lava Lamp?

Any FDM printer should handle Mini Lava Lamp just fine. It's been printed on machines like Bambu Lab A1, Prusa MK4, Creality Ender 3, Anycubic Kobra. A minimum build volume of 200 mm is recommended.

Does Mini Lava Lamp need supports when printing?

No supports needed for Mini Lava Lamp — it's designed to print clean off the bed.

How long does it take to print Mini Lava Lamp?

According to the design notes, Mini Lava Lamp takes approximately 1 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

Is Mini Lava Lamp beginner-friendly?

Mini Lava Lamp is a mid-level print. A bit of experience helps, but it's nothing a careful beginner can't tackle with standard slicer settings.

What file format is Mini Lava Lamp available in?

Mini Lava Lamp is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is Mini Lava Lamp free to download?

Yes, Mini Lava Lamp is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee

DE EN FR ES IT NL