Thingiverse
Mini Mill X2 Z Axis CNC Conversion
by Shurakair
30
Downloads
15
Likes
0
Makes
This is a CNC conversion for my Little Machine Shop mini mill (3990).
I got the bulk of the design from LittleCareBear's design, but I wanted to make some changes.
Parts needed:
M5x0.80 20mm bolt (7)
M4x0.7 20mm bolt (4)
M4x0.7 nut (4)
M5x0.8 18mm flat head bolt (4)
M3x0.5 20mm bolt (4)
M3x0.5 nut (4)
608-ZZ 8x22x7 Bearing (2)
8x32mm shaft
8mm Flange shaft coupler (2)
20T GT2 pulley
Not shown in video
You will also need a GT2 timing belt
Closed Loop L=280mm W=6mm 140 Teeth Rubber Drive Belt (1)
M5x0.8 nut (4) - There are pockets in the back of the mounting bracket to hold these.
X Axis: https://www.thingiverse.com/thing:3531440
Y Axis: https://www.thingiverse.com/thing:3530809
https://youtu.be/dH1mrW_AdaQ
I got the bulk of the design from LittleCareBear's design, but I wanted to make some changes.
Parts needed:
M5x0.80 20mm bolt (7)
M4x0.7 20mm bolt (4)
M4x0.7 nut (4)
M5x0.8 18mm flat head bolt (4)
M3x0.5 20mm bolt (4)
M3x0.5 nut (4)
608-ZZ 8x22x7 Bearing (2)
8x32mm shaft
8mm Flange shaft coupler (2)
20T GT2 pulley
Not shown in video
You will also need a GT2 timing belt
Closed Loop L=280mm W=6mm 140 Teeth Rubber Drive Belt (1)
M5x0.8 nut (4) - There are pockets in the back of the mounting bracket to hold these.
X Axis: https://www.thingiverse.com/thing:3531440
Y Axis: https://www.thingiverse.com/thing:3530809
https://youtu.be/dH1mrW_AdaQ
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
