Thingiverse
Mini rack - 19 cm wide
by AndersV209
58
Downloads
33
Likes
0
Makes
i wanted a mini rack that was a bit wider tha the original, so i changed some of the open scad files, to make i how i liked, and i made som custom lasercut sides and tops for it.
all the cabinets is in the .zip file.
i have made a cabinet for the ikea trådfri gateway, (you need to take it apart)
i have also made a cabinet for the xiaomi gateway, so you dont need to use the australien plug and power pcb. and you will need a custom pcb, that i have also added the eagle files for.
i also changed the screw holes to be m3 size, that you can ude at tap or just the screw in.
all the cabinets is in the .zip file.
i have made a cabinet for the ikea trådfri gateway, (you need to take it apart)
i have also made a cabinet for the xiaomi gateway, so you dont need to use the australien plug and power pcb. and you will need a custom pcb, that i have also added the eagle files for.
i also changed the screw holes to be m3 size, that you can ude at tap or just the screw in.
AndersV209 also publishes on
35 additional models across 1 more platforms
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
