Mini Santa Clause Figure – 3D printable model from MakerWorld

MakerWorld

Sculptures

Mini Santa Clause Figure

by Parro · Sculptures

15 Downloads

4 Likes

0 Makes

Go to Model

Cartoony Santa Mini Sculpture (3D Printable)Bring some cheerful holiday spirit to your desk or shelf with this adorable 3D-printed Santa Claus mini sculpture! Designed in a cartoony, low-poly style, this model balances simplicity and charm, making it both beginner-friendly and visually striking once printed.Santa stands firmly on flat ground, ready for display — Supports required!🧱 Model DetailsType: Decorative figurine / Mini sculptureHeight: About 40 mm (scalable)Printability: Better for PLA and PETGSupports: RequiredInfill: 10–20%Layer Height: 0.16–0.20 mmOrientation: Base flat on bed⚙️ Recommended SettingsParameterSettingMaterialPLA (red, white, black, Yellow, Peach, recommended)Layer Height0.16 mmPerimeters2–3Infill10–20%SupportsNonePrint Time~2–4 hours🧡 Design FeaturesSolid footing — stands easily on flat surfacesSimple geometric forms for quick printingWorks great as a desk ornament, tree decoration, or giftClean separations between color zones for multi-filament prints⚠️ Lice

Santa Claus santa Christmas mini clase sculpture 3d print figure gift present statue

Category

Sculptures

Source

MakerWorld

Published

07.11.2025

Updated

30.04.2026

What you need to print this: Intermediate Medium confidence

Why?

supports needed · large print

Single piece Supports required

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 2/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

PLA, PETG

Min. bed size

200 mm (Large)

Est. print time

4 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Mini Santa Clause Figure?

Any FDM printer should handle Mini Santa Clause Figure just fine. It's been printed on machines like Bambu Lab A1, Prusa MK4, Creality Ender 3, Anycubic Kobra. A minimum build volume of 200 mm is recommended.

Does Mini Santa Clause Figure need supports when printing?

Yes, Mini Santa Clause Figure will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

How long does it take to print Mini Santa Clause Figure?

According to the design notes, Mini Santa Clause Figure takes approximately 4 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Mini Santa Clause Figure available in?

Mini Santa Clause Figure is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is Mini Santa Clause Figure free to download?

Yes, Mini Santa Clause Figure is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee

DE EN FR ES IT NL