Mini Self watering planter with indicator

This is a mini self watering planter with a water indicator.size (90mm x 72.94mm x 88.44mm) how to set it upStep 1: get some Styrofoam (i found out that styrofoam is the best type of material for a floaty.)Cut the styrofoam by at least (12mm x 12mm x 40mm) Note: the safe height limit is probably around 55mm but the thickness should be around 12mmStep 2: insert the part with a water droplet to the indicator container then stab the styrofoam with it. there&#39;s a slight indentation to how far the indicator should goStep 3: Puzzle time!! assemble all the “?” parts to the outside container. most parts will be a snug fit but some parts might not fit because of the dropping (see below) ⬇️so what I did was sand them. if you don&#39;t have a small sander that can fit that, just turn the cube to the side and it should fit, but it&#39;s going to be loose so put some super glue. For the most part, the cube should be a snug fit because of the X-Y Compensation settings<img src="https://makerworld.