Thingiverse
Mini Skewb (35mm)
by 5284973user
48
Downloads
46
Likes
1
Makes
A basic Mini Skewb that I made a long time ago, with the intention of using it for various shape mods. It measures 35mm to an edge. It requires four Dayan screws and springs to function; these can be purchased on TheCubicle.us. The pictures show a possible sticker pattern that is more interesting than a standard 6-color Skewb.
Some notes:
- Two core files are included; they have slightly different tolerances to account for different expansion/contraction in ABS and PLA.
- Two center files are included; the one with an alignment nub can be used to more easily attach custom extensions.
- The "floating corner" is constructed of a stem and base which are tightly fit together when printed in ABS. It may be slightly loose when printed in PLA and may need to be glued.
- Caps need to be attached with a dab of glue. There is not enough surface area for the cap to stay gripped on by itself.
PARTS ROSTER:
1x Core (ABS).stl OR Core (PLA).stl
6x Center.stl OR Center (For Extensions).st
Some notes:
- Two core files are included; they have slightly different tolerances to account for different expansion/contraction in ABS and PLA.
- Two center files are included; the one with an alignment nub can be used to more easily attach custom extensions.
- The "floating corner" is constructed of a stem and base which are tightly fit together when printed in ABS. It may be slightly loose when printed in PLA and may need to be glued.
- Caps need to be attached with a dab of glue. There is not enough surface area for the cap to stay gripped on by itself.
PARTS ROSTER:
1x Core (ABS).stl OR Core (PLA).stl
6x Center.stl OR Center (For Extensions).st
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
