Mini Stealthburner Remote Cooling Drop-in Adapter

This model is a drop in replacement for the 2x 4010 blower fans that are standard on a mini stealthburner toolhead. No screws or other mounting is needed. Internal geometry is designed to guide airflow directly to the part cooling ducts. This model was designed around specifically the Mini Stealth - Mini Sherpa by atrushing over on teamfdm. This will likely fit into many toolheads which require dual 4010 blowers, but may not have ideal geometry for airflow on other models. Please note that the model does NOT have the same dimensions are a standard 4010 blower, it is designed slightly shorter to have a flush fit with the back of the Mini Stealth. Keep this in mind if using with other models. The Y splitter will likely not work on other models, so you will need to source/design one. Print one Left and one Right and drop into the 4010 fan mounts. The Y splitter should clip into the hole at the top where a blower would normally go. The fan drop ins can be printed without supports if you ha