Hobby
Ver Modelo
Mini Table for Solo Camping
462
Descargas
379
Likes
0
Makes
Joint parts for a mini table. Using wood rods as frames, cardboard as tabletop.
I designed this model for bicycle trips. (lightweight and easy to carry)
I uploaded 2 series, diameter 3/8inch(approximate as 9.6mm) and 8.0mm.
Check your wood rod's diameter ( and 3D printer accuracy ) by tester_9.6mm.stl or tester_8.0mm.stl.
All models can be printed without supports.
Wood rod in the photo is 300mm in length, 8mm in diameter (Easy to buy in Japan). Search 3/8"x12" wooden dowel at amazon.com.
Instruction:
1. Download and print tester_9.6mm.stl for 3/8" wood rods, or tester_8.0mm.stl for 8mm wood rods.
2. Determine wood rod's diameter by the tester.
3. Download corresponding zip file, print and assemble!
[Japanese]
8mm径の丸棒で小さな三角テーブルを組み立てるためのジョイントです。天板にはダンボールを使います。
自転車旅行で使うために設計しました。(軽量、パニアバッグ内で場所を取らない)
寸法を正確に合わせる必要があるので、tester_8.0mm.stl を出力して実際のサイズを確認して下さい。tester_9.6mm.stl は米国向けの3/8インチ径用です。
全てのパーツはサポートなしで印刷できます。
作成手順:
1. ホームセンターで売っている8mmx900mmの丸棒(1本100~200円)を
I designed this model for bicycle trips. (lightweight and easy to carry)
I uploaded 2 series, diameter 3/8inch(approximate as 9.6mm) and 8.0mm.
Check your wood rod's diameter ( and 3D printer accuracy ) by tester_9.6mm.stl or tester_8.0mm.stl.
All models can be printed without supports.
Wood rod in the photo is 300mm in length, 8mm in diameter (Easy to buy in Japan). Search 3/8"x12" wooden dowel at amazon.com.
Instruction:
1. Download and print tester_9.6mm.stl for 3/8" wood rods, or tester_8.0mm.stl for 8mm wood rods.
2. Determine wood rod's diameter by the tester.
3. Download corresponding zip file, print and assemble!
[Japanese]
8mm径の丸棒で小さな三角テーブルを組み立てるためのジョイントです。天板にはダンボールを使います。
自転車旅行で使うために設計しました。(軽量、パニアバッグ内で場所を取らない)
寸法を正確に合わせる必要があるので、tester_8.0mm.stl を出力して実際のサイズを確認して下さい。tester_9.6mm.stl は米国向けの3/8インチ径用です。
全てのパーツはサポートなしで印刷できます。
作成手順:
1. ホームセンターで売っている8mmx900mmの丸棒(1本100~200円)を
CyberCyclist también publica en
16 modelos adicionales en 1 plataformas más
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!