Mini Talon twin motor pod conversion

This is a twin motor mount design inspired by the Mini Talon twin motor conversion originally posted by Markqv.

I changed the design a little so the motor is covered by a cowling and a 38mm spinner can be used to cover the pods. This makes the motor mounts look and feel a bit more aerodynamic. I don't know if it will make any difference in performance since the Mini Talons flight speed is rather slow. The setup I used consists of 2 Turnigy D2830/11 1000Kv motors turning a 7x7" propeller powered by a 3cell Lipo or a 4 cell 18650 Liion battery pack. I also removed the spar which in Markqv`s design went trough the wing, instead I glued the mounts to the wing using D4 PU construction glue, a link can be found below.

Additionally I added a cooling inlet duct on the front bottom of the motor mount and a cooling outlet duct on the rear top side of the motormounts, these ducts allow sufficient aiflow trough the motormounts to keep the motors cool.

The motors are mounted to the pods by