Thingiverse
Mini USB-C PD PSU
door CADMAD
13
Downloads
12
Likes
0
Makes
Parts you'll need:
DPS5005 Adjustable DC Constant Voltage Power Supply Module
Type-C PD2.0 PD3.0 Fast Charge Trigger
Banana Terminals
XT60 connector
KCD3 Swtich
Rubber feet
All can be purchased from Aliexpress.
The switch is used to choose the input, XT60 or USB-C.
The square cut-out on the right is for an optional USB A output, you can add a little module if you want.
You'll need to do a bit of sanding as it's a tight fit. You'll also have to remove the tabs on the side of the screen and switch.
DPS5005 Adjustable DC Constant Voltage Power Supply Module
Type-C PD2.0 PD3.0 Fast Charge Trigger
Banana Terminals
XT60 connector
KCD3 Swtich
Rubber feet
All can be purchased from Aliexpress.
The switch is used to choose the input, XT60 or USB-C.
The square cut-out on the right is for an optional USB A output, you can add a little module if you want.
You'll need to do a bit of sanding as it's a tight fit. You'll also have to remove the tabs on the side of the screen and switch.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
