Miniature Claw Gun

This mini claw gun is perfect for a challenge with colleagues to see who can collect more filament poop at once. You can determine the length yourself by using a longer or shorter PTFE tube, but be careful, it can quickly become very difficult if the tube is too long.Especially if you have bought a combo version of the printer, you will probably still have PTFE tubes available. Building instructions:First you have to cut off a piece of filament, light it and if it burns, blow it out immediately and then press it into the part with the smaller hole as quickly as possible. Then press a PTFE tube of any length into the other part and bring the two together as shown in the picture.Now feed the other end of the filament through the handle as shown in the picture. Leave about 2 cm of space between the tube and the handle and about 1 cm at the end.Now light this too, pull the filament out a little and then press it onto a smooth surface.Assemble everything