Thingiverse
Miniature stand frame v2
von mah_digilife
2
Downloads
1
Likes
0
Makes
Previous design
*This design has strength issues. It will loosen over time.
*The new design is tough.
https://www.thingiverse.com/thing:5755185
A stand system for miniatures.
It attaches using magnets.
If it is a 1m bar, you can arrange about 20 to 25 characters.
Other Required items
-D33 Pole x2
-3x15mm Aluminum frame
-M3x50mm bolt and nut
-D6 x 3m magnet
-M3 washer react to magnets
-Glue
A level tool is useful when assembling the pole and frame.
Glue the washer to the adapter.
Press the magnet into the clip and plate.
*This design has strength issues. It will loosen over time.
*The new design is tough.
https://www.thingiverse.com/thing:5755185
A stand system for miniatures.
It attaches using magnets.
If it is a 1m bar, you can arrange about 20 to 25 characters.
Other Required items
-D33 Pole x2
-3x15mm Aluminum frame
-M3x50mm bolt and nut
-D6 x 3m magnet
-M3 washer react to magnets
-Glue
A level tool is useful when assembling the pole and frame.
Glue the washer to the adapter.
Press the magnet into the clip and plate.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
