Miniature YETI Cooler Model

A miniature YETI cooler, its fully functional (aside from keeping things cool) with latches and a hinged lid. Print with PLA or PETG, the latches can be printed in PETG / PLA, but TPU is recommended for longevity. Hardware0.9 - 1 mm wire in lengths of: 25mm x2 for hinges, and 12mm x2 for latches Assembly Make sure to remove the supports on the cooler hinge cavity. Remove the custom supports on the lid Insert a 1mm x 25mm wire into the hinge hole (both sides) by tapping it with a small hammer or something. Slide a 1mm x 12mm into the latch hole on the lid (both Sides) I've found that leaving it stick out a little can help align it with the latch. Align a latch with the pin and push the pin in Then use something metal