Minimal Wall Clock – 3D Printing

A clean and contemporary wall clock designed in Fusion 360, featuring a smooth circular face and a separate decorative element that is printed independently and glued onto the base. The model includes the clock face, the central decorative piece, and three hands (hour, minute, second), all designed around the dimensions of a standard quartz mechanism. The fit of the central cross is intentionally tight, as it must be glued in place during assembly. 📐 Dimensions ***Diameter:** 220 mm ***Thickness:** 6 mm ***Center hole:** 8.2 mm (compatible with 16 mm shaft mechanisms) 🧩 Components Included Clock face Central decorative element (printed separately) Three hands: hour, minute, second ⚙ Mechanism Compatibility Designed for quartz clock movements with a16 mm shaft, such as the mechanism available on Amazon (product code B0DYDDK352). The mechanism is mounted by inserting the shaft through the center hole and securing it with the included nut. The clock is hung using thehook integrated into the mechanism’s casing. 🛠 Assembly Insert the mechanism shaft through the center hole. Tighten the nut to secure the mechanism. Attach the three hands in the correct order. Hang the clock using the built‑in hook on the mechanism. 🖨 Printing Notes The decorative element benefits from a finer layer height. The clock face can be printed faster due to its simple geometry. Hands should be lightweight and well‑balanced for proper operation. 🏡 Recommended Use Perfect for minimalist interiors, clean environments, and modern living spaces. Subtle textures and micro‑imperfections enhance realism and give the piece a handcrafted feel. If you print it, feel free to share a photo!