Thingiverse
Minimalist, Modular Hard Drive Racking System
door jbkuma
16
Downloads
10
Likes
0
Makes
Designed to be easy to print and assemble.
The part is ambidextrous. Print two per drive. Recommend 3 or more walls if you intend to drill the holes. I recommend using 1/2in 6-32, or 10mm or 12mm M3.
Despite hard drives being tapped for 6-32, M3 bolts can be used if you don't over torque them (as pictured). 30mm/1-1/4 bolts can be used to tie layers together, or threaded rod can be run through the stack.
Versions posted with holes sized for M3 and 6-32.
If printed "U" side flat on the bed (as pictured in "print orientation" image) no supports are required
The part is ambidextrous. Print two per drive. Recommend 3 or more walls if you intend to drill the holes. I recommend using 1/2in 6-32, or 10mm or 12mm M3.
Despite hard drives being tapped for 6-32, M3 bolts can be used if you don't over torque them (as pictured). 30mm/1-1/4 bolts can be used to tie layers together, or threaded rod can be run through the stack.
Versions posted with holes sized for M3 and 6-32.
If printed "U" side flat on the bed (as pictured in "print orientation" image) no supports are required
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!