minotaurs hueforge

A 7 colours hueforge with a pause enabled to change colours in AMS . Have fun and post pics of your makes! Project: Minotaurs.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.72mmThe Max Depth is 2.6mm and the Actual Depth is 2.7mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Cocoa Brown Transmission Distance: 0.4 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Silver Transmission Distance: 0.5 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Red Transmission Distance: 4This print uses 7 unique filamentsSwap Instructions: Start with Black At layer #13 (1.12mm) swap to Blue Gray At layer #16 (1.36mm) swap to Cocoa Brown At layer #17 (1.44mm) swap to Beige At layer #22 (1.84mm) swap to Silver At layer #23 (1.92mm) swap to Jade White