Mirco Screwdriver Multi Bit Magnetic

This is my pocket magnetic (optional) micro screwdriver tool. Dimensions: 43mm height, 25 mm diameter. You can place up to three different bits in the handle giving you flexibility when using it. Add the in-print magnet (5mm diameter, 3mm height) is not mandatory, however if used the bits will be kept in the handle bar by the magnet (similar to well known existing electric screwdriver adapters). You may get magnets I used at AMAZON (https://www.amazon.de/dp/B0BMZX8FV3?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_2&th=1) Instructions: The print of the handle will automatically stop at layer 88. If you don´t want to add a magnet, please continue printingPlease add a small drop of glue (for example UHU - as in the picture) to ensure the magnet won´t come offCarefully place the magnet in the corresponding holeWait 2-3 minutes, then complete the printNo special instructions for the lidOnce the print is finished I suggest to put a bit in the holder and wait for a couple of minutes to widen the