Mirrorless Camera Shock Absorber

The hardware required for the model is as follows:4 shock absorbers with 120mm hole spacing8 bearings (outer diameter 10, inner diameter 4, thickness 4mm)8 M4x50 screws8 M4 nuts4 M3x30 screws (for connecting the ball head holes of the shock absorber)4 M3 nuts4 M6x50 screws4 M6 nuts (or French nuts)【 For connecting Cameras 】 : one G1/4x25mm screw【 Choose One of the two 】 : M6x50 screw + nut , or G1/4x50 screw + nut 【 Optional reinforcing Parts 】 : 8 M3x30 self-tapping screwsThe original spring wire diameter of RC car suspension is 1.0mm, which can bear a load of about 1.2kg. It can be matched with 600 grade RC suspension oil. If the load is different, the threaded ring can be rotated according to the needs to adjust the spring pressure. If the load is significantly different from 1.2kg, it is also possible to consider replacing springs with different wire diameters or combining springs with different wire diameters.Regarding suspension:It is recommended to purchase shock absorbers with