MiSTer Mini Case V3

Mini MiSTer case for DE-10 Nano. The goal was to create a case for a budget MiSTer setup. Just the DE-10 Nano, ram, heatsink, fan, and ram should come in well under $200. This is a good way to get into MiSTer without spending an arm and a leg.

Fits XS ram board, 25x10mm heatsink, 40x10mm A4 fan, and has access to the SD card, ethernet, USB micro, both USB mini, HDMI, and power port. I included both STL and STEP files for ease of editing.

Several versions of the top are available. With/ without text, and with/ without the vents on the top (I think it will run plenty cool without them and will prevent dust from collecting inside)

The top and bottom should be printed, and the sides can be printed or laser cut. If laser cut, 3mm or .125" thickness should fit.

If you are going to plug in a USB hub, use the USB micro connector. Be careful not to draw too much current from this single connector (1A Max total I believe). If you are running things that require more current, get an e