Mister MT32pi CASE / HAT

This thing modifies some existing designs to provide an integrated case for the MT32pi hat and a pi3a

The original pi 3a case was not designed by me and can be found here :

http://www.thingiverse.com/thing:3241692

The Shim i modified was created by d0pefish and the original can be found here :

https://www.thingiverse.com/thing:4736679

Assembly is easy, requiring 4 off M3 x 16mm bolts and 4 off M2.5 x 10mm bolts.

Place pi3a into base and fit the shim on the top of the case , Secure with the 4 M2.5 bolts, These will self thread so dont overtighten.

Assemble the HAT with the supplied spacer holding together with the M3 bolts, This will still be loose until screwed into the case making one complete unit, again threads will cut as tightened so be aware not too over tighten.

Hope this all goes well for you as it did for me........

Lee

*** 24/01/22 I have added a stand ( by request ) i made primarily for my use as a test ***