Miter Fence

Miter fence for my Craftsman table saw. It locks every 10 degrees, 45 degress, and +/- 2.5 and 5 degrees off that.

Use 1/4-20 bolts (locking bolt should be 2", if you want a bolt in the center, make it 3.5"), and drop a nut in the handle.

Remember -- if you set this at an angle to fit the bed, *don't* use 45 degrees (very weak); use 50 degrees or change your infill orientation.

I printed 80%, but... it's not really that important.