Mitsubishi Lancer Evo 10

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm  The Model is 200x200mm in size  You may print at higher layer heights below the Base Thickness of 0.48mm  The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.68mm Filaments Used: #080a0d PLA PolyLite Black Transmission Distance: 0.3 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #1067c2 PLA Prusament Royal Blue Transmission Distance: 0.8 #00f52c PLA Sunlu Green Transmission Distance: 4.7 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue Gray At layer #13 (1.12mm) swap to Royal Blue At layer #14 (1.2mm) swap to Green for the rest.