Thingiverse
Mixing Spoon
door Petal3D
136
Downloads
108
Likes
1
Makes
Make a Mixing Spoon, as is found in many kitchen drawers. You may use the model for applications as diverse as a movie props, dolls house, wargaming or even in your kitchen.
Print the Mixing Spoon with 10% to 25% infill and supports. Paint in your desired colour scheme. Use wet-blending and/or dry-brushing to simulate the wood grain. If required, apply a clear coat to seal the paint.
If printing the Mixing Spoon for use in your kitchen, print with up to 50% infill and supports. Apply a clear sealing coat. Make sure that all materials are food-safe by referring to their respective material safety data sheets.
To print the Spoon using a smaller format filament printer (Dreamer, Inventor, etc.):
(1) Rotate the model 30 degrees Z and scale to 75%.
(2) In your slicer split the model, print the pieces, drill holes for wood/aluminium/steel connecting pins, and finally glue the pieces together.
The model was modelled in ViaCAD from a real mixing spoon.
Print the Mixing Spoon with 10% to 25% infill and supports. Paint in your desired colour scheme. Use wet-blending and/or dry-brushing to simulate the wood grain. If required, apply a clear coat to seal the paint.
If printing the Mixing Spoon for use in your kitchen, print with up to 50% infill and supports. Apply a clear sealing coat. Make sure that all materials are food-safe by referring to their respective material safety data sheets.
To print the Spoon using a smaller format filament printer (Dreamer, Inventor, etc.):
(1) Rotate the model 30 degrees Z and scale to 75%.
(2) In your slicer split the model, print the pieces, drill holes for wood/aluminium/steel connecting pins, and finally glue the pieces together.
The model was modelled in ViaCAD from a real mixing spoon.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
