MMA Rooster- Hueforge

by LambAE92 · Hueforge & Lithophane

6 Downloads

12 Likes

2 Makes

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. The Model is 165x220mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Basic Red Transmission Distance: 4PLA BambuLab Basic Silver Transmission Distance: 0.5PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments (May use other colors than listed) Swap Instructions:Start with BlackAt layer #11 (0.96mm) swap to RedAt layer #17 (1.44mm) swap to SilverAt layer #21 (1.76mm) swap to Jade White for the rest.