MMDVM Duplex Hotspot Case with 2.4" Oled, Raspberry Pi Zero

Case for a MMDVM Hotspot, I used a Raspberry Pi Zero W, a Duplex Hotspot and a 4 Pin OLED Display with 2.4"

Parts I used:
1x Raspberry Pi Zero 2 W
1x Duplex HotSpot, https://www.aliexpress.com/item/1005004725371911.html?spm=a2g0o.order_list.order_list_main.292.f1651802LuKLa8
1x 2.4" Oled Display, https://www.aliexpress.com/item/1005005241315177.html?spm=a2g0o.order_list.order_list_main.338.f1651802LuKLa8

Front panel:
8x Countersunk M3 x 12mm
6x M3 Nuts
2x 12mm Standoff with M3 thread
2x Brass M3 Inserts, holes on the right side by the display (not in the picture)

Rear case:
2x Countersunk M3 x 12mm
2x Countersunk M3 x 16mm

Connection like usual:
Power --- Power (Voltage)
Ground --- Ground
SCL --- SCL
SCA --- SCA
Software: https://www.pistar.uk/

I also made a bracket for wall mounting.

I made two front covers, one is empty, the other one is for the Pi-Star Panel.

Use at your own risk ;-)