Thingiverse
Model Gearbox
73
Téléchargements
76
Likes
0
Makes
In our mechanical design course, we were tasked with designing a gearbox for a micro hydro generator. The gearbox was required to accept a high-torque, low-speed input from a water turbine and convert it into an output with low torque and high speed. Our group‘s solution was a 3-stage spur gear system, with a drive ratio of 18.34 (49.08RPM input, 900RPM output) producing 13 horsepower.
With a few modifications, I was able to create a 3d-printable model of the gearbox. I cut out the faces so that the system's inner workings would be visible and replaced the tapered roller bearings with skateboard bearings, but aside from that, this miniature model stays true to the original design. All parts except for the ball bearings, bolts, washers, and nuts are 3D-printed: https://youtu.be/b7kzGnCRKPg
I created this model to be compatible with 608 ball bearings when printed at 50% scale. In the video, you can see I'm driving the system in reverse, as the torque required to drive the input sha
With a few modifications, I was able to create a 3d-printable model of the gearbox. I cut out the faces so that the system's inner workings would be visible and replaced the tapered roller bearings with skateboard bearings, but aside from that, this miniature model stays true to the original design. All parts except for the ball bearings, bolts, washers, and nuts are 3D-printed: https://youtu.be/b7kzGnCRKPg
I created this model to be compatible with 608 ball bearings when printed at 50% scale. In the video, you can see I'm driving the system in reverse, as the torque required to drive the input sha
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
