Thingiverse

Model Rocket Centering Rings

von jgutz20

40 Downloads

22 Likes

0 Makes

In the past year i've been getting into building rockets via kits. I've started to build my own and decided to start printing my parts for convenience and to save Money. I've been able to find Centering Rings here and there as parts of other kits but the results were always iffy. I decided to make my own centering rings. I've made rings for 18mm (Estes A,B,C) and 24mm (Estes D,E) motors. Some straight rings, some with a notch for a metal retainer clip. The size tubes i've included rings for vary from BT-80, BT-70, BT-60, BT-55, 29mm and BT-50. I made the centering rings 2mm larger than the 18/24mm tubes respectively, so these are designed for a snug fit. I've been easily filing the inner rings just a bit when i need a bit more space, or when trying to fit them on a motor tube that might not have a perfect end to prevent it from crumpling. I've also included the ring to slide inside the motor tube itself as a stop for your motors. (These are labeled 18mm-EngineMount-

24mm 29mm 33mm bt-50 BT-55 Bt-60 BT-70 Bt-80 Centering Centering Ring model rocket motor ring rings rocket 24mm 29mm 33mm bt-50 BT-55 Bt-60 BT-70 Bt-80 Centering Centering Ring model rocket motor ring rings rocket

Quelle

Thingiverse

Was du zum Drucken brauchst: Anfänger Niedrige Konfidenz

Einteilig

Supports 1/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 0/3

Drucker

FDM / FFF

Dateiformat