Modern Bicycle Wall Holder

As i needed a bicycle holder for the wall i designed this item influenced by similar parts on big shop with A...They where not totally convincinged to me so i designed a holder for a 40mm wooden rod in fusion. The holder is fixed to wall with a 6x70 countersunk screw (i highly recommend torx driven screws) and 8mm wall dowel. The wooden rod is additional secured by 2x 4,5x20 panhead screws from the back.In my case the wooden rod is a oak stair handrail from Hornbach hardware store. Length of the pieces is depending on width of your bicycle handlebar. If you like your bike and the coating, you can add some self adhesiv foam. Printed in xPETG matte from Extrudr with theire profile (not included in makerworld profile). To create a good strength i used 6 walls, 5 top and bottom layer, 0,2mm layer hight and 20% cross hatch infill.Printed around 7h on my P1S. It seems to be pretty strong. A colleague used one of this holder for one bike (instead 2) and instead a collapsing bike holder, the w