Modular Connector Panel system for 19" Racks

These are a redesign of my earlier aerial mounting system for 19" racks thing:4039193

Whilst making the aerial mounts I realised that whilst they were perfect for their original purpose of mounting aerials they were not really strong enough for connectors.

So I redesigned them making them box section rather than the original arched shape for strength and added holes at the top and bottom so they cane be bolted together both horizontally and vertically to make 2 or 3 Unit panels (or more).

I also added a little to the length of the outer ones as they were sized for my own Pulse ABS racks. which are very slightly narrower than some other racks.

They are simply bolted together with M3 nuts and bolts in whatever combination you need I used M3 x 12 Capscrews and nuts but you could use anything you like. Washers under them help to give a stronger joint and it is advisable to assemble the panels before putting the connectors in as access is a bit tight.

There are

Blank Brac