Thingiverse
Modular Dry Filament Storage System
por Bortimus_Prime
49
Descargas
14
Likes
0
Makes
Project Video -> https://youtu.be/osKXpeKmHQ8
This system uses the Snapware 9.5L dry food storage container.
It is modular in that the box with tubes forms a kind of module that snaps onto the printer. The set of 3D models includes three parts needed to attach to a CR-10 machine.
Also uses:
2x Bowden tube connector with M5 thread
2x Bowden tube connector with M6 thread
Panel-mount thermometer/hygrometer
5/16" steel rod, 187mm long
4x 608zz ball bearing
2x 800mm Bowden tube
6x m3 x 10mm socket cap screw
8x M3 x 12mm socket cap screw
14x M4 nyloc nut
Clear silicone sealant
Only the inside filament port requires printed support.
This system uses the Snapware 9.5L dry food storage container.
It is modular in that the box with tubes forms a kind of module that snaps onto the printer. The set of 3D models includes three parts needed to attach to a CR-10 machine.
Also uses:
2x Bowden tube connector with M5 thread
2x Bowden tube connector with M6 thread
Panel-mount thermometer/hygrometer
5/16" steel rod, 187mm long
4x 608zz ball bearing
2x 800mm Bowden tube
6x m3 x 10mm socket cap screw
8x M3 x 12mm socket cap screw
14x M4 nyloc nut
Clear silicone sealant
Only the inside filament port requires printed support.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!