Thingiverse

Modular Magnetic Mini Camera Mount

by RJGII

53 Downloads

46 Likes

0 Makes

This case and the brackets were created to meet my needs for a small wide-angle camera for use with OctoPrinti/OctoPi.

The camera used is this one:
[https://www.amazon.com/gp/product/B00LQ854AG/](https://www.amazon.com/gp/product/B00LQ854AG/)
Thingiverse seems to be changing that link, search for "ELP-USBFHD01M 180 degree fisheye"

I had to modify octopi.txt to add the correct camera options; this is what I used:
> camera_usb_options="-r HD -f 60"

The knobs, arms, and printable screws/nuts can be found here and is the project these items are remixed from:
[https://www.thingiverse.com/thing:2194278](https://www.thingiverse.com/thing:2194278)

For the magnetic mounts, you must pause the print before the slots are closed off, insert the magnets, then resume the print. I use Prusa's ColorPrint site to insert an M600 command into the gcode for the appropriate layer. It should work for any firmware that understands the command and can be found here:
[https://www.prusaprinters

Adjustable arm camera case magnetic modular mount mounting system octopi Octoprint prusa Adjustable arm camera case magnetic modular mount mounting system octopi Octoprint prusa

Source

Thingiverse

What you need to print this: Advanced Low confidence

Why?

significant post-processing

Hardware needed

Supports 1/3

Assembly 2/3

Settings 1/3

Bed size 0/3

Post-process 2/3

Printer