Modular Pedal Board

Modular pedal board that's printable on a 256x256 print bed!The 3mf file includes the endcaps, low supports for the bottom row, high supports for the top row and some PSU clips for attaching your power supply to the underside of the top row. EndcapsThe endcaps are set up for 1x2 // 19x38mm timber and have a 3mm wide screw hole with 2mm chamfering. A 4mm tapered screw with a head diameter of 9mm will fit flush against the endcap. Before assembling I'd suggest you run your screws through the endcap holes without any timber in so the screws can cut into the PLA. 15mm of your timber will go inside each endcap so measure out how long you want your pedal board and add 3cm to the total. I printed these in PLA, they seem sturdy enough. SupportsThese require a pair of 3x16mm tapered wood screws per support. You can print as many supports as you want, I chose to print 2 pairs for my 62cm board but I probably could have gotten away with 1 pair. I printed these in PETG as it's what I h