Modular Printer Stand and Filament Storage System

Transform unused space into organized storage with this fully modular printer stand system. Designed for makers, this 3D printable bracket set uses inexpensive 3/4” wooden dowels and a standard 1x10 board to create a sturdy shelf with customizable width and depth. Two heights available 300mm tall and 260mm tall.  Whether you need a compact filament rack, an under-printer storage solution, or a larger workstation, the system can be expanded by bolting multiple bracket sets together. Features Modular design allows multiple sections to be connected for increased depth. Supports standard 3/4” wooden dowels for easy and inexpensive assembly. Designed for use with a common 1x10 board as the top shelf. Available in two heights:260 mm version for compact printers. 300 mm version for larger printers or increased storage clearance. Uses 1/4-20 heat-set inserts for strong, reusable threaded connections. Dowels can be secured with wood screws through the provided access holes for additional rigidity. Hardware Required 3/4” wooden dowels 1x10 board for the top shelf 1/4-20 heat-set inserts 1/4-20 bolts Wood screws for dowel retention Example Configuration By connecting two bracket sets together, you can create a printer stand approximately 20 inches deep with convenient filament storage underneath. The modular design makes it easy to adapt the stand to different printer sizes and workspace requirements. Print Recommendations Material: PETG recommended for strength and durability. Or ABS. Supports: Not required. Layer Height: 0.20 mm Infill: 15%