Thingiverse
MOLLE Axe & Accessory Hanger
di TheCafeRacer
330
Download
245
Likes
0
Makes
MOLLE Axe Hanger..
Uses a 3x2 panel to hang something like an axe from MOLLE. Use 1/8" shock cord or 550 paracord. There are 4 holes on each panel allowing for a number of different configurations.
I recommend printing with PETG as it has some flexibility and will not get brittle.
Print two of them and add parachord or shock cord however you would like. I use a fixed loop on the top panel and tie a knot on the bottom to keep the axe in place.
Insert the longer legs in first and then individually sqeeze the shorter legs into the other row of MOLLE. The shorter legs are intended to face downwards, so gravity will work in your favor.
The original file is already close fit on my LBT backpack. Use the second file MOLLEAxe(Shorter).stl if it is too tight.
STEP file included if you want to make changes.
Uses a 3x2 panel to hang something like an axe from MOLLE. Use 1/8" shock cord or 550 paracord. There are 4 holes on each panel allowing for a number of different configurations.
I recommend printing with PETG as it has some flexibility and will not get brittle.
Print two of them and add parachord or shock cord however you would like. I use a fixed loop on the top panel and tie a knot on the bottom to keep the axe in place.
Insert the longer legs in first and then individually sqeeze the shorter legs into the other row of MOLLE. The shorter legs are intended to face downwards, so gravity will work in your favor.
The original file is already close fit on my LBT backpack. Use the second file MOLLEAxe(Shorter).stl if it is too tight.
STEP file included if you want to make changes.
TheCafeRacer pubblica anche su
53 modelli aggiuntivi su altre 2 piattaforme
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
