MakerWorld

Electronics

Monitor Arm 3d printed

von martinMaker · Electronics

1.1k Downloads

454 Likes

137 Makes

OverviewI designed a monitor stand for my secondary screen because I didn’t want to spend €30 on a commercial one. This model is easy to assemble and sturdy enough for everyday use.Required MaterialsA rigid tube with a diameter of around 35 mm from a classic arm stand like this :M5 screws (any length, optional but recommended for rigidity)Five M3×25 mm screws (three are enough in my case) with nutsTwo M6 screws for the baseAll the printed parts (see the model’s page for the full list)Assembly StepsSlide the "Arm 1" part onto the tube.Insert “Pied de liaison Part 1”(Optional) Add M5 screws to increase stability using the designated holes.Attach the "Arm 2" part, which holds the VESA plate.Secure the 100×100 VESA plate using M3×25 mm screws.Insert the "Pied de liaison Part 2" to fill the gap in the hinge.<img c

monitor arm monitor 24 inches stand monitor arm monitor arm accessory lg xioami Samsung acer viewsonic monitor mount mount screen holder screen holder monitor stand vesa mount vesa desk mount bracket

Kategorie

Electronics

Quelle

MakerWorld

Veröffentlicht

22.05.2025

Aktualisiert

30.04.2026

Was du zum Drucken brauchst: Mittel Niedrige Konfidenz

Einteilig Hardware nötig

Supports 1/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 1/3

Drucker

FDM / FFF

Dateiformat

STL

Material

PLA

Nachbearbeitung

Hardware

Software

Cura, PrusaSlicer o. Ä.

Noch keine Bewertungen

Noch keine Kommentare – sei der Erste!

Monitor Arm 3d printed

Ähnliche Modelle

Zur Sammlung hinzufügen