Thingiverse
Monitor enclosure for 7-inch unit
door mattyklem
1
Downloads
1
Likes
0
Makes
Saw a great price on a 7-inch 1024x600 IPS touch monitor on Ali for USD$26:
https://www.aliexpress.us/item/3256807246146590.html?spm=a2g0o.order_list.order_list_main.49.6b011802S4VhOr&gatewayAdapt=glo2usa
Threw together this case to protect the unit. Also included a base to hold the unit upright. These are separate to limit the need for support during printing. You'll need two of course. The face is designed for heat press inserts (M3x5mm) and you'll need four M3x10mm cap screws to hold it all together. The back has a subtle up arrow for alignment. You may need to drill out the monitor mounting tab holes to 4mm for alignment since there seems to be some variability - I ordered 4 and had to drill out 2 of them. If you do drill go slow on drill speed to prevent cracking the PCB
https://www.aliexpress.us/item/3256807246146590.html?spm=a2g0o.order_list.order_list_main.49.6b011802S4VhOr&gatewayAdapt=glo2usa
Threw together this case to protect the unit. Also included a base to hold the unit upright. These are separate to limit the need for support during printing. You'll need two of course. The face is designed for heat press inserts (M3x5mm) and you'll need four M3x10mm cap screws to hold it all together. The back has a subtle up arrow for alignment. You may need to drill out the monitor mounting tab holes to 4mm for alignment since there seems to be some variability - I ordered 4 and had to drill out 2 of them. If you do drill go slow on drill speed to prevent cracking the PCB
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
