Monster head that throw up slime

The model exported very small from ZBrush so the first thing to do is: in slicer put Z size to at least 50mm with uniform scaling.

Then I recommend printing it in two pieces:
- First, move Z to -25mm
- Second, rotate 180º and the move Z to -25mm
This will do the trick since the slicer will only print from Z 0mm and above.

Slicer settings:
Wall thickness to 2mm and 1 or 2 walls (I prefer 2)
Keep the rest as default (Cura)

Filament type: TPU

Once both pieces printed, use white glue, and with your finger cover all the inside surface with a layer of it. This will prevent slime filtrations. White glue should dry off in 24 to 48 hours.

Cut the mouth and the eyes with a Dremel or similar tool.

Then glue both pieces with cyanoacrylate and fill the head with slime.

Last but not least: enjoy it!

Video: https://youtu.be/SMCxCmq8eTY


(I added my gcode files as a sample)