Monstruo hueforge

Project: Monstruo.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm  The Model is 123.76x220.78mm in size  You may print at higher layer heights below the Min Depth of 0.48mm  The Max Depth is 3mm and the Actual Depth is 2.2mm Filaments Used: PETG JAYO Black Transmission Distance: 0.3 PETG JAYO Gray Transmission Distance: 2.5 PETG GEETECH Gray Transmission Distance: 3 PETG JAYO White Transmission Distance: 6 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Gray At layer #11 (0.96mm) swap to Gray At layer #21 (1.76mm) swap to White for the rest.