Monumental Stone: Chess Set

Not much to say about this chess set. I was exploring texture and patterns. Interesting feel in your hand moving the piece on the board. ⚠️ Print & Handling NotesThese models include fine, delicate details.A strong filament is recommended — or anneal your set for additional strength (see below). Bambu Studio SettingsPrinter Settings• Nozzle Diameter → 0.4 mm• Compatible Material → PLA+ Filament Settings• Nozzle Temperature (first layer) → 205 °C• Nozzle Temperature (others) → 200 °C• Bed Temperature (first layer) → 60 °C• Bed Temperature (others) → 50–55 °C• Cooling Fan:◦ Layer 1–2 → OFF◦ Layer 3+ → 100% Quality• Layer Height (Standard) → 0.20 mm• Initial Layer Height → 0.20 mm• Line Width → 0.45 mm• Elephant Foot Compensation → 0.15 mm Speed• First Layer Speed → 20 mm/s• Outer Wall Speed → 35 mm/s• Inner Wall Speed → 50 mm/s• Infill Speed → 50 mm/s• Travel Speed → 120 mm/s Acceleration / Jerk• Default Acceleration → 1000 mm/s²• Outer Wall Acceleration → 500 mm/s²• First Layer Accelera