Thingiverse

Moon city

by kijai

14.3k Downloads

13.3k Likes

360 Makes

Go to Model

Update: There's a new, better version of this model now available here:
[Moon City 2.0](https://www.myminifactory.com/object/52920)

Update 2: I have now made a version of this model that can be printed in 3 pieces:
[Moon City multipart, lamp edition](https://www.myminifactory.com/object/3d-print-moon-city-multipart-lamp-edition-87610)

========================================

A city inside a ruined moon. Based on a drawing I've seen around, but couldn't figure out the original artist...found many derivatives only.

Anyway I was looking for inspiration and when I saw the drawing I immediately wanted to try creating it in 3D, and this is the result.

EDIT: I've now found out that the original art is called "Arabian Crescent" and it's made by the very talented Chris Kawagiwa: https://www.chriskawagiwa.com

This is a very long print at default scale, which was pretty much necessary for me to print some of the details on the buildings. Took around 12 hours at 60mm/s and

art building city Decoration fantasy lunar miniature moon ruins art building city Decoration fantasy lunar miniature moon ruins art building city Decoration fantasy lunar miniature moon ruins art building city Decoration fantasy lunar miniature moon ruins

Source

Thingiverse

What you need to print this: Advanced

Why?

supports needed · 3-part assembly · large print

Supports required

Supports 2/3

Assembly 1/3

Settings 1/3

Bed size 2/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

200 mm (Large)

Est. print time

12 h

Software

Cura, PrusaSlicer, or similar

Same designer, more platforms

kijai also publishes on

63 additional models across 2 more platforms

Frequently Asked Questions

Which 3D printer is suitable for Moon city?

Any FDM printer should handle Moon city just fine. It's been printed on machines like Bambu Lab A1, Prusa MK4, Creality Ender 3, Anycubic Kobra. A minimum build volume of 200 mm is recommended.

Does Moon city need supports when printing?

Yes, Moon city will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

How long does it take to print Moon city?

According to the design notes, Moon city takes approximately 12 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

Is Moon city beginner-friendly?

Moon city is on the trickier side — supports are needed. Worth getting a few simpler prints under your belt first if you're still learning.

What file format is Moon city available in?

Moon city is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Moon city free to download?

Yes, Moon city is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Moon city

Similar Models

Add to Collection