Moonlight Dock Area HueForge with frame

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 113.33x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 1.92mm Filaments Used: #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #f56233 PLA BambuLab Basic Orange Transmission Distance: 5.3 #ae015a PLA BambuLab Basic Magenta Transmission Distance: 3 #002a96 PLA BambuLab Basic Cobalt Blue Transmission Distance: 1.2 #0086d6 PLA BambuLab Basic Cyan Transmission Distance: 3.5 #8bd5ee PLA BambuLab Matte Ice Blue Transmission Distance: 3.5 #fec600 PLA BambuLab Basic Sunflower Yellow Transmission Distance: 4.4 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 8 unique filaments Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Orange At layer #7 (0.64mm) swap to Magenta At layer #8 (0.72mm) swap to Black At layer #9 (0.8mm) swap to Cobalt Blue At layer