Moonlight Inner Support for LED

I created this model because I couldn’t find a suitable internal part for installing an LED lamp inside the standard Moonlight model. Feel free to use it for your own projects.The model was printed using PLA filament with a UV-absorbing additive, allowing the part to glow in the dark after exposure to light. Standard PLA printing settings were used.The top and bottom parts were printed separately in Orca Slicer.Layer height was set to 0.2 mm for the main part, while the bottom was printed with a finer 0.16 mm layer height.The bottom part was created using the Fuse and Skin modifiers, and the surface texture was achieved using Fuzzy Skin.The parameters controlling the texture were Fuzzy Skin Thickness and Fuzzy Skin Point Distance. I no longer remember the exact values, but they were adjusted to visually match the original Moonlight model — approximately around 0.4–0.6 for both parameters. Depending on your slicer version and filament, some fine-tuning may be required.For lighting, I us