Moons bookmark - HueForge

by Morfeo_XX · Hueforge & Lithophane

84 Downloads

79 Likes

34 Makes

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.14mmThe Model is 50x159.9mm in sizeYou may print at higher layer heights below the Min Depth of 0.46mmThe Max Depth is 2.2mm and the Actual Depth is 2mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.6 PLA eSUN Blue Gray Transmission Distance: 0.6 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA Smart Materials Gold Transmission Distance: 0.8This print uses 4 unique filaments Swap Instructions: Start with Black At layer #6 (0.54mm) swap to Blue Gray At layer #8 (0.7mm) swap to Jade White At layer #17 (1.42mm) swap to Gold At layer #23 (1.9mm) swap to Jade White for the rest. Boost MeIf you like it, remember to hit the like and boost button.