More Koi - HueForge Print

Y'all liked the last Koi filament painting I did, so I tripled it!Bambu Studio users can use the 3MF with all the filament swaps already loaded in. For those of you who don't, or want to set up your own filament swaps and settings, please follow the instructions below! If you need to resize this to a bigger print, PLEASE ONLY CHANGE THE X and Y DIMENSIONS. Altering the Z height will make the layer swaps incorrect. Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm Filaments Used:PLA Kingroon Black Transmission Distance: 0.4PLA Kingroon White Transmission Distance: 8PLA BambuLab Tough Vermilion Red Transmission Distance: 3PLA BambuLab Basic Jade White Transmission Distance: 5Swap Instructions:Start with BlackAt layer #19 (0.92mm) swap to WhiteAt layer #37 (1.64mm) swap to Vermilion RedAt layer #44 (1.92mm) swap to Jade White for the rest._______________________________________If you'd like to support me, I now have a Patreon! Joining will give you behind the s